Current position:
Product classification
1-20 KVA Special UPS Power
    发布时间: 2024-04-24 17:23    

1-20 KVA Special UPS Power

1-20 KVA Special UPS Power
Power UPS(1-20kVA)-single phase input
DUPS seriesParameter indicators
Rated power1kVA2kVA3kVA5kVA6kVA8kVA10kVA15kVA20kVA
DC
input
Rated voltage(VDC)110VDC/220VDC220VDC
Operating voltage
range (VDC)
98~143VDC/198/~286VDC198~286VDC
AC
input
AC input voltage(VAC)220VAC±20%(Default)
Bypass input
frequency(Hz)
(50±5%)Hz
Efficiency≥92%
Power  factor≥0.99
Bypass
input
Bypass input
voltage(VAC)
220VAC±15%(Default)
Bypass input
frequency(Hz)
(50±5%)Hz
 Switching
time
Inverter to bypass switching≤4ms
AC and DC switching0ms
AC
output
Rated voltage(VAC)(220±1%)VAC
Rated frequency(Hz)(50±0.5%)Hz  battery status
Power  factor0.8
Load adjustment rate<2.0%
Frequency accuracy<0.1%
Peak factor3:1
Waveform distortionResistive full load<3%, non-linear full load<5%
Efficiency>90%
Overload capacity1. <100%, continuous operation; 2. 105~125%, continue for 10min and then switch to bypass;
3. 125~150%, turn to bypass after 1 min; 4. >125% immediately switch to bypass.
Protection
function
OverloadSwitch to bypass power supply, and automatically switch to inverter after load reduction
Overtemperature>85 ℃, switch to bypass power supply, and automatically switch to inverter after temperature reduction
Short circuitShutdown output, protection alarm
Inverter faultBypass power supply after inverter fault, alarm
UndervoltageDC undervoltage automatic shutdown
DisplayLED displayMain street lamp, inverter lamp, side street lamp, DC lamp, output lamp, fault lamp
LCD displayUPS working state, AC and DC input voltage, output voltage, output current, load power,
communication settings, etc
Give an alarm6-way dry contact1. Abnormal communication; 2. Bypass operation; 3. DC abnormal/low battery voltage;
4. Inversion abnormality; 5. Power overload; 6. Power failure
CommunicationRS485Standard configuration of one channel RS485 communication
EnvironmentOperating temperature(-5~40)℃
Relative humidity(0~95%) non condensing
Noise<55dB@1m
Input isolation transformerInternalInternalExternalExternal
Output isolation transformerInternalInternalDC110V:external,
DC220V:internal
External
Mechanical dimensions of main
engine (W * L * D) (mm)
482.6*480*177(4U)482.6*450*311(7U)DC110V:482.6*450*266(6U)
DC220V:482.6*450*311(7U)
482.6*450*266(6U)